CB-5000
The Clean Burn CB-5000 is the largest waste oil furnace the EPA allows. No other unit is as robust and reliable for extracting free heat from waste oils. The CB-5000, which generates approximately 500,000 BTU/hr, is the choice for large repair and service facilities with multiple bays where larger quantities of waste oil are generated and/or collected. A Clean Burn Distributor is the expert you want for furnace selection and installation.
MODEL INFORMATION
FEATURES
Engineered from the ground up to burn waste oils
Patented heat exchanger generates more heat
Unique non-welded flue tubes for longer service life
Advanced burner preheats oil to optimize combustion
Swing-away burner and door make service easy
Longest cleaning interval of all units in its class
Lower stack temperatures, higher heat output
Automatic flow control means no fuel adjustment required
Ideal for unit heating or with a Clean Burn Recycling Center
Unequaled service and support from Clean Burn Distributors
SPECS
Model CB-5000 | Specs. |
---|---|
*Maximum BTU/hour | 500,000 (147 kW) |
*Maximum oil consumption | 3.3 GPH (12.5 L/h) |
Fuels | Used oils: Crankcase,ATF, hydraulic Fuel oils: #2, #4, and #5 fuel oil |
Air flow output (CFM) | Unit heater 5500 Central furnace (ducted) 0.25 SPWC (in.) 5200 0.30 SPWC (in.) 5000 |
*Air compressor required | 2.5 CFM @ 25 PSI (4.25 m3/h @ 1.7 bar) |
Stack Size | 10 inch dia.(25cm dia.) |
Furnace Dimensions, Assembled | 78” L x 38 W x 73 H (198cm x 97cm x 185cm) |
Approx. Weight (uncrated) | 1036 pounds (470 kg) |
Electrical Requirements | 230 VAC 60 Hz, single phase 30 A circuit breaker |
*Values indicated above are nominal. Actual values will vary depending on fuel and installation.
RESOURCES